Crank cocking device for EK Guillotine M and X crossbows

Cocking winch for EK Archery Guillotine M and X crossbows

To use this crank, you will need to install the small adapter provided in the kit, allowing you to attach the crank cocking device.
This crank has been designed to make it easier for you to cock your EK Archery crossbow. It's ideal if you have arm pain or don't want to strain yourself with the manual cocking device.

Read the user manual below and carefully look at the photos.

Winch compatible with EK Archery Guillotine M and X crossbows

Kit contents:

- 1 adapter
- 1 cocking crank

User manual:

1) Install the adapter on the original stock of the crossbow
2) Attach the crank to the rail of the stock you just installed.
3) Press the aluminum lever to release the ratchet
4) Pull on the hooks to catch the string, passing underneath the crossbow
5) Pass the middle of the string through the chute located at the back of the handle (this reduces the force needed for cocking)
6) Check that the crank cable passes correctly over the crossbow
7) Install the crank handle and turn until the string is held and the safety engages (turns green)
8) To release the string from the hooks, press slightly on the crank to be able to press the aluminum lever that will release the ratchet
9) You can remove the hooks and use your crossbow

ATTENTION!!! : Don't forget step 5 above. If you don't route the winch cable through the channel as shown in the photos, you risk breaking your winch cable.